<Back

Aquabub Small

Description

The Small Aquabub is suitable for installation in a shallow pool and must be installed where it will be submerged in 6” (152.4mm) to 12” (304.8mm) of water. A piped in water source is required.

The water feature is formed from a laminar jet which creates a large turbo mix with the surrounding water, resulting in a soft foaming water effect 8-12” (203.2-304.8mm) above the surface of the water with 12” (304.8mm) spray diameter. The units create a wonderful low level water effect which encourages interaction for children and parents alike.

Fabricated from brass castings with a tamper proof removable nozzle head for cleaning, the units are easily maintained.

Operation is at a maximum pressure of 15gpm @ 10psi or 1.0L/s @ 7m.